Need help?Do you have a question about the TMT Automation BOXER800E and is the answer not in the manual?
Illustrates the typical placement of gate opener components.
Details the main components of the sliding gate opener system.
Provides physical measurements and specifications for the gate opener unit.
Guides the process of mounting the motor and attaching the gear rack.
Outlines essential checks to perform after installation to ensure proper function.
Explains how to manually disengage the motor in case of power failure.
Details how to connect the various wires to the control board terminals.
Describes the procedure for pairing and removing remote controls.
Guides through the system auto-learning, factory reset, and LED indicators.
Explains how to configure various operational parameters via the control panel.
Details the steps for verifying the gate opener's functionality after setup.
Explains the meaning of different LED indicators on the control board.
Provides detailed specifications for the BOXER500E and BOXER800E models.
Lists specifications and performance details for the H2 photocell sensor.
Provides technical specifications for the R1 radio transmitter.
Details the specifications for the FL2 flashing light accessory.
Offers instructions and specifications for installing safety photocells.
Explains the installation and usage of the Green Box for power saving mode.
General| Brand | TMT Automation |
|---|---|
| Model | BOXER800E |
| Category | Gate Opener |
| Language | English |
To Next Page
