EasyManua.ls Logo

Toa A-1706 - Specifications

Toa A-1706
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
12. SPECIFICATIONS
Model No. A-1706 A-1712 A-1724
Power Source 220 – 230 V AC or 240 V AC, 50/60 Hz
Rated Output 60 W 120 W 240 W
Power/Current Consumption 150 W (rated output), 258 W (rated output), 532 W (rated output),
60 W (EN60065) 105 W (EN60065) 220 W (EN60065)
Under 150 mA (when Under 320 mA (when Under 60 mA (when
power switch is OFF) power switch is OFF) power switch is OFF)
Frequency Response 50 – 20,000 Hz (±3 dB)
Distortion Under 2% at 1 kHz, rated power
Input MIC 1 – 6: –60 dB*
1
, 600 Ω, electronically-balanced, combined type of
XLR-3-31 equivalent and phone jack
AUX 1 – 2: –20 dB*
1
, 600 Ω, electronically-balanced, combined type of
XLR-3-31 equivalent and phone jack
(Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable)
AUX 3 – 4: –20 dB*
1
, 10 kΩ, unbalanced, RCA pin jack
AUX 5: –20 dB*
1
, 10 kΩ, unbalanced, combined type of XLR-3-31
equivalent and phone jack
PWR AMP IN: 0 dB*
1
, 600 Ω, unbalanced, RCA pin jack
(An equalizer or other signal processor connectable between LINE OUT
and PWR AMP IN terminals)
Output REC: 0 dB*
1
, 600 Ω, unbalanced, RCA pin jack
LINE: 0 dB*
1
, 600 Ω, unbalanced, RCA pin jack
SPEAKER SELECTOR: 2 zone, high impedance*
2
(100 V line), individual
selector key, M4 screw terminal*
3
DIRECT SPEAKER OUT:
High impedance*
2
(100 V line), M4 screw terminal*
3
,
Low impedance (4 – 16 Ω), M4 screw terminal*
3
Note: Both Low and High impedance terminals cannot be used at the same time.
Phantom Power ON or OFF for each MIC 1 – 6 with switch setting
S/N Ratio Over 100 dB (Master volume: min)
(Band Pass: 20 – 20,000 Hz) Over 76 dB (Master volume: max)
Over 60 dB (MIC 1 – MIC 4)
Over 53 dB (MIC 5, MIC 6)
Over 76 dB (AUX 1 – AUX 5)
Tone Control Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
Control Input REMOTE VOLUME: M3 screw terminal*
3
POWER REMOTE: No-voltage make contact input
Open voltage: 28 V DC (when the unit's power is OFF)
Short-circuit: Under 10 mA, M3 screw terminal*
3
Indicator 5-point LED output level meter, Power indicator LED, Zone indicator LEDs
Operating Temperature –10°C to +40°C
Finish Panel: ABS resin, black, hair line
Case: Steel plate, black
Dimensions 420 (w) x 107.7 (h) x 367 (d) mm
Weight 9.3 kg 12.6 kg 13.5 kg
*
1
0 dB = 1 V
*
2
167 Ω (A-1706), 83 Ω (A-1712), 42 Ω (A-1724)
*
3
Distance between barriers on the above screw terminals: 7 mm (M3 screw), 9 mm (M4 screw)
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
AC power cord ................................................. 1
Terminal cover ................................................. 1
Terminal cover mounting screw (M4 x 8) ......... 2
• Optional products
Rack mounting bracket: MB-25B
Volume control cover: YA-920
Perforated panel: PF-013B

Related product manuals