Toa DP-SP3 - 11 Firmware Version Indication

17
4
A CB
Ver. 2.1.
(Example)
Indicates "A." Indicates "B." Indicates "C."
1
2
3
4
9
5
6
7
8
5
6
7
8
8
5
6
7
8
1
2
3
4
9
9
2 3
4
1
DP-SP3
Indicates "A." Indicates "B." Indicates "C."
Lights
Lights
Lights
11. FIRMWARE VERSION INDICATION
TheDP-SP3’srmwareversioncanbeconrmedbycheckingthelightingindicatorstatusontheDP-SP3’s
front panel.
• FirmwareVersionIndication
 TheDP-SP3’srmwareversionisexpressedasshowninthefollowingexample.
 Here,theindividualnumbersaredenotedbyA,B,andC.
• Howtocheckrmwareversion
 WhentheDP-SP3isactivated,theindicatorsonthefrontpanellightfor3seconds,indicatingthegureof“A,”
“B,”and“C.”
 Thegurethateachindicatorindicatesisasfollows.
Note: Ifalltheindicatorsin“B”and“C”sectionsareunlit,itrepresents“0.”
In the above example of “Ver. 1.2.4”, the indicators of each section light as follows.