13
Step 6. Operate the marker if necessary.
Clicking or dragging the graph on the screen will show the channel with the Marker and reception level
on the Marker display, so the reception level can be checked by numbers.
The channels with smaller reception levels can be considered available.
Step 7. Click on the Stop Scan button.
Channel Scan will stop.
Step 8. Make a channel plan according to the results.
The channels with higher reception are considered in use.
Check the frequency table sheet supplied with the receiver, and decide channels to use by avoiding the
channels with high reception levels.
Note
The interference situation can change daily.
When the situation changes, review the channel plan.
To Next Page
Loading...