3
1. SOFTWARE SUMMARY
1.1. Summary
This software connects the WT-D5800 Digital Wireless Receiver with a personal computer, and monitors
the status of its microphone and receiver. It is used to check the status of the signal in the area where the
microphone is used when the wireless microphone system is set up or when trouble occurs. It has a system
status display function and a log storage function. The software allows the user to check the system status
when there are reception problems and reviews the setup and operation methods.
The following specications must be met to install the software onto the computer.
[Recommended PC environment]
Hardware requirements
Display 1024 x 768 or greater, High Color or greater
Free hard disk space 200 MB or greater
USB USB 2.0
Software requirements
OS Windows 7 SP1 (32/64-bit), Windows 8.1 (32/64-bit),
Windows 10 (32/64-bit)
Note: Windows is the registered trademark of Microsoft Corporation in the United States and other countries.
1.2. Usage
It can be used when Use this function
Setup
Checking the system status. System Status Display p. 14
Checking unused channels in order to make a channel plan. Channel Scan p. 11
Checking the signal reception status in the area. Walk-Test p. 20
After setup
Checking the system status. System Status Display p. 14
Checking unused channels due to possible interference such as
sound disruption.
Channel Scan p. 11
Checking the status of jamming signals due to possible interference
such as sound disruption.
Spectrum Scan p. 24
Checking the reception status while the system is in operation due
to occasional sound disruption.
Background Log p. 16
To Next Page
Loading...