Note:
Confirm
whether the
engine side shift is in
gear
when
shifting the
control
lever
of
the Remote
Control Box to its first
position
in Forward
or
Reverse
(about
32")
and whether the throttle
of the
carburetor
is
fully
open
when
shifting
the lever further.
Confirm whether the carburetor's throttle is fully
closed when the
control
lever is
shifted
to the Neutral
position.
@
Connecting the Cord assembly
(Wiring
Harness)
Pass the Cord assembly from the Remote control
box through the hole
in the Lower motor cover and cover the wire
ends with the Sleeve
(provieded
in
a tool bag) and then connect the electric
terminals
according
to
the drawing below.
And also
protect
the battery cords and the cable harness with
the
protective
tube, and then fix the
tube
with
the band and the clamp.
(a
protective
tube and a
band
are
provided
in
a tool bag)
To Next Page
