37
7
ENGINE OPERATION
ENOM00042-0
ENOM00246-0
Oil Level checking
Check the engine oil level before each
use. If the oil level is low or too high, the
life of the engine will be shortened signif-
icantly. (To properly check the engine oil
level follow the instructions,
see page 64)
1. Oil filler cap
2. Dipstick
3. Filler port
1. Upper limit 4200 mL (4.4/3.7 US/Imp qt.)
2. Lower limit 2200 mL (2.3/1.9 US/Imp. qt.)
ENOM01804-0
ENOW00029-A
When opening fuel tank cap, be sure to fol-
low the procedure described below. Fuel
could blast out through the fuel tank cap in
case the cap is loosened by using another
procedure when internal pressure of fuel
tank is raised by heat from sources such as
sun light.
ENOW00030-B
When using EPA approval fuel tank, only use
a primer bulb/hose assembly that has a Fuel
Demand Valve (FDV) installed in the fuel hose
or a sealing mechanism in the fuel connector
as shown below.
FDV and fuel connector that has an sealing
mechanism prevent pressurized fuel spillage
when the fuel connector is connected to the
engine.
1. FDV in fuel hose
2. Sealing mechanism in fuel connector
3. Identification
Before starting
1. Fuel feeding
WARNING
WARNING
To Next Page
Loading...
Need help?
General
