ENGINE OPERATION 51
7
1. Throttle grip
2. Put the shift lever in the Neutral posi-
tion.
Run the engine for 2-3 minutes at
idling speed for cooling down if it has
been running at full speed.
Basic tiller handle type
3. Push the stop switch for a few sec-
onds to stop the engine.
1. Stop switch
2. Stop switch lock
Multi-function tiller handle type
3. Turn the main switch key to the OFF
position.
4. Push the stop switch for a few sec-
onds to stop the engine.
5. Turn the main switch key to the OFF
position or push the stop switch. ( Do
not forget to turn the key off).
1. Throttle grip
2. Shift lever
3. Main switch key
Side mount RC type
1. Put the control lever in the Neutral
position and run the engine for 2-3
minutes at idling speed for cooling
down if it has been running at full
speed.
1. Control lever
2. Main switch key
2. Turn the main switch key to the OFF
position.
1
N
R
F
1
2
ENOF00881-1
To Next Page
Loading...
Need help?
General
