TOHATSU MFS 4D User Manual

PRE-OPERATING PREPARATIONS 27
6
When using integral tank
1. Before opening fuel tank cap, turn air
vent screw two turns counterclock-
wise to release air pressure in the fuel
tank.
1. Air vent screw
2. Fuel tank cap
2. Open the fuel tank cap slowly.
3. Remove top cowl and fill the fuel not
to over the full mark.
1. Full mark
4. After filling the tank, close the fuel
tank cap.
When using separate tank
1. Fully open the air vent screw on the
tank cap and release internal pres-
sure.
1. Air vent screw
2. Fuel tank cap
2. Open the fuel tank cap slowly.
3. Fill the fuel carefully not to over flow.
4. After filling the tank, close the fuel
tank cap.
1
ENOF00416-B
2
1
ENOF00418-0
1
2
ENOF00417-1
SAFE FILL
LEVEL
12 L
NIVEAU
MAXIMUM
ENOF00419-A

TOHATSU MFS 4D Specifications

General

Brand	TOHATSU
Model	MFS 4D
Category	Outboard Motor
Language	English