TOHATSU MFS 4D User Manual

ENGINE OPERATION34
7
ENOW00404-0
When using integral tank, disconnect fuel
connector.
ENOW00947-0
When using a separate tank, be sure that the
fuel line is not kinked and is connected
securely.
4. If you use a separate tank, connect
the fuel connector to the engine side
with pushing fuel connector lever.
And then, connect the fuel connector
to the fuel tank side.
1. Fuel connector
2. Push
3. Insert
1. Pull
2. Insert
5. Squeeze primer bulb until it becomes
stiff to feed fuel to carburetor. Point
the arrow mark upward when priming.
1. Engine side
2. Fuel tank side
Do not squeeze primer bulb while engine
running or when the outboard motor is
tilted up to avoid fuel from overflowing.
ENOM00045-C
ENOW00958-1
z Do not remove or install the top cowl
after the engine has started.
z The exposed rotating engine parts cause
serious injury.
ENOW00959-0
The top cowl must be installed while the
engine running except in an emergency. If
the top cowl is not installed correctly, water
splash can damage the engine.
ENOW00036-1A
When starting the outboard motor in the
test tank, make sure that:
CAUTION
CAUTION
1
2
2
3
3
ENOF00423-0
1
2
ENOF00861-A
2. Starting the engine
WARNING
CAUTION
CAUTION
1
2
ENOF00862-0

TOHATSU MFS 4D Specifications

General

Brand	TOHATSU
Model	MFS 4D
Category	Outboard Motor
Language	English