EasyManuals Logo

TOHATSU MFS 4D User Manual

TOHATSU MFS 4D
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
PRE-OPERATING PREPARATIONS32
6
ENOM00041-D
Warning indicators, faults and remedy
Remarks
*1: In this case, oil pressure switch is “ON”.
High speed ESG (Electronic Safety Governor)
High speed ESG is a device to prevent over revolution of the engine. If the load to the engine becomes light for
some reason, it runs at a higher speed than the usual. In such the case, the ESG is activated not to ignite the
spark plug. Therefore, the engine speed varies and is controlled under 6300min
-1
(rpm).
Warning indicators
Description of faults Remedy
Sound Lamp (LED) ESG
-
On for several
sec.l
Normal system test when start up
-- ON
Engine speed exceeds maximum
allowable RPM
1
- ON - Low oil pressure
*1
2
ENOM00126-A
Remedy
1.
Reduce the speed to less than half
open throttle, and move to safe place
quickly, and stop the engine.
Check the propeller for bent or dam-
age on blades.
Consult an authorized dealer if engine
shows the same result even after
replacing propeller with a new one.
2.
Move to safe place quickly, and stop
the engine until it cools down.
Check the engine oil level, and add
engine oil if necessary.
Consult your dealer if the engine oil
level is too low or too high.
ENOW00025-B
High speed ESG ON: Engine speed will be
limited to 6300 min
-1
(rpm) and engine will
run rough until throttle is reduced.
CAUTION

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TOHATSU MFS 4D and is the answer not in the manual?

TOHATSU MFS 4D Specifications

General IconGeneral
BrandTOHATSU
ModelMFS 4D
CategoryOutboard Motor
LanguageEnglish

Related product manuals