INSPECTION AND MAINTENANCE 55
10
*1: Have this handled by your dealer.
Outboards used in rental, commercial, or other under severe condition as described
below in detail require more frequent inspections and maintenance than shown in this
manual.
z Continuous operation at maximum engine speed
z Continuous operation at idling or trolling speed
z Operation without appropriate warm up
z Stopping without sufficient time for the engine to cool down
z Frequent sudden acceleration and sudden deceleration
z Frequent stop start operation
z Frequent shifting operation
z Frequent operation in acidic, polluted, muddy, sandy, or shallow water
Appropriate maintenance can prolong your engine life.
Consult your Tohatsu authorized dealer for suitable maintenance interval depending on
operating and environmental conditions.
Outer Equipment
zzzz
Check for corrosion.
Anode
zzz
Check for corrosion and deformation.
Replace if neces-
sary.
Description
Inspection intervals
Inspection procedure Remarks
First 20
hours or
1 month
Every 50
hours or
3 months
Every 100
hours or
6 months
Every
200
hours or
1 year
To Next Page
Loading...
Need help?
General
