TOHATSU MFS 6C - Removal and Disassembly of Crank Case Head

5
5-17
4st 4/5/6 2011
4) Removal and Disassembly of Crank
Case Head
1. Remove bolts and remove crank case head ass'y 1.
11
2. Remove gasket 2.
2
3. Remove two oil seals 3.
3
6. Remove bolts 8 (6 pcs.), and then, lift power unit to
remove.
88
7
6
5. Turn throttle grip to full close position, and disconnect
throttle cables 7 (2 pcs.) from throttle drum 6.
②
Do not reuse.
③
Do not reuse.
When lifting power unit, perform the work carefully
while checking if cables and hoses are caught by
other parts.
MFS4-5-6Ech05110425.qxd11.4.2511:39AM  ページ17