To Next PageTo Next Page
Need help?Do you have a question about the Tohnichi ProTork CPT20X10D-G and is the answer not in the manual?
Explains safety alert symbols and signal word definitions for risk assessment.
Lists potential risks and necessary precautions to avoid serious obstacles.
Details potential risks of obstacles that may not result seriously.
Details the main body, operating instruction, batteries, interchangeable head, and storage case.
Lists optional accessories available for the torque wrench, such as cables and software.
Covers LCD display, indicator lights, and detailed display information for operational feedback.
Explains the function of each control key for operating the torque wrench and its settings.
Describes the terminal used for connecting the torque wrench to a PC for data output.
Details functions like Auto Zero for calibration and Auto Memory/Reset for data saving.
Covers power management features, battery status, and over torque alarms for safe operation.
Explains the mode where applied torque is displayed directly without peak holding.
Describes the mode that captures and displays the maximum applied torque value.
Details the mode for adjustable torque setting with visual and audible feedback for completion.
Explains the mode providing a judgement (OK/NG) based on set lower and upper torque limits.
Guides on setting target torque and range for simple tightening operations with feedback.
Explains how to select pre-registered target torque values for measurement modes.
Provides step-by-step instructions for performing tightening operations using the wrench.
Covers basic settings like selecting measurement mode and subject for configuration.
Details settings specific to the Preset tightening mode, including target range and torque.
Details settings for the Judgement mode, such as limits, direction, and judgement criteria.
Covers additional settings like measurement unit, baud rate, data length, and parity.
Guides on choosing between mode settings (MODE_S) and parameter settings (PARA_S).
Explains how to set the tightening mode and confirms data clearance before proceeding.
Details how to set the target torque range percentage for visual indication.
Explains setting up to 10 different target torque values (A-J) for measurement.
Guides on choosing between mode settings (MODE_S) and parameter settings (PARA_S).
Explains how to set the tightening mode to JUDGE for judgement-based operations.
Confirms data clearance when changing settings, advising to record data beforehand.
Covers setting lower and upper limit values for torque and the tightening direction.
Covers settings for sound, baud rate, data length, parity, and default return.
Explains how to select and convert between different torque units (N·m, kgf·cm, etc.).
Configures the delay for automatic data saving after tightening completion.
Configures sound alerts and communication baud rate for external data transfer.
Sets data length and parity for communication, essential for data integrity.
Resets all user-configured settings back to the factory default values.
Details communication parameters like baud rate, data length, stop bit, and parity.
Specifies the data format for outputting measurement results to a PC.
Instructions for inserting AA batteries (alkaline or Ni-MH) and recommended types.
Covers battery life, low battery indicators (LoBATT), and usage recommendations.
Lists and explains various error codes (Err1-Err5, Err8, Err9) that may appear.
Provides guidance on how to resolve common errors, including when to contact support.
Lists key technical specifications like power source, operating temperature, and display type.
Details the torque range, graduation, and accuracy for each model variant.
Provides physical dimensions (L, L', b, h) and weight specifications for the models.
Lists included accessories like ratchet heads and storage cases, and optional items.
General