Tohnichi ProTork CPT100X15D-G User Manual

TOHNICHI DIGITAL TORQUE WRENCH FOR TIGHTENING
MODEL CPT-G
To use this product correctly and safely, please read this manual carefully before use.
If you have any questions about the product, contact your nearest distributor or TOHNICHI MFG. CO., LTD.
CPT20X10D-G
CPT100X15D-G
CPT280X22D-G
OPERATING INSTRUCTION

Tohnichi ProTork CPT100X15D-G Specifications

General

Brand	Tohnichi
Model	ProTork CPT100X15D-G
Category	Tools
Language	English

Summary

Cautions on Safety

User Safety Instructions

Guidelines for safe operation and proper use.

Critical Safety Warnings

Essential warnings regarding environment and accessory use.

General Safety Cautions

Important cautions for maintaining safe working conditions and handling.

Precautions for Use

General Use Precautions

Essential guidelines for operating the torque wrench safely and effectively.

Emergency Response

Torque Wrench Identification

Component Identification

Identification and explanation of the physical parts of the torque wrench.

LCD Display Information

Explanation of the information displayed on the LCD screen.

Function Explanations

Auto Zero Function

Auto Memory/Reset

Over Torque Alarm

Functionality and indication of exceeding the set torque limit.

Torque Limit Parameters

Table detailing torque limits for alarms and peak hold.

Operating Modes

Maximum Value Display (PEAK Mode)

Explanation of the PEAK mode for capturing maximum torque values.

Tightening Modes Overview

Overview of Preset and Judgement tightening modes.

How to Use: Preset Mode

Preset Mode Operation

Step-by-step guide for using the Preset tightening mode.

Selecting Target Torque

How to select and set the target torque values.

How to Use: Preset Mode Operation Details

Tightening Process: Preset Mode

Visual guide showing LED and buzzer indicators during tightening.

How to Use: Judgement Mode

Judgement Mode Operation

Detailed steps for using the Judgement tightening mode.

Selecting Target Torque for Judgement

How to set lower and upper limit torque values for judgement.

Tightening Process: Judgement Mode

Step-by-step guide for tightening with judgement.

How to Use: Data Management

Saving Measured Data

How to save measured torque data in both modes.

Reading Out Data

Procedures for reading stored measurement data.

How to Use: Data Output and Deletion

Outputting Data to PC

Deleting Measured Data

Settings and Configuration

Common Settings

Preset Mode Settings

Judgement Mode Settings

Configuration: Preset Mode

Preset Mode Configuration Steps

Configuration: Mode Specifics

Target Range Setting (Preset Mode)

Target Torque Setting (Preset Mode)

Judgement Mode Configuration Steps

Configuration: Judgement Mode Details

Lower Limit Value Setting (Judgement Mode)

Upper Limit Value Setting (Judgement Mode)

Tightening Direction Setting (Judgement Mode)

Error Message Troubleshooting

Error Codes Err 1-5

Explains errors related to membrane switch input and their solutions.

Error Code Err 8

Error Code Err 9

Explains errors related to torque sensor or circuit board malfunction.