13
⑭ Operation Power ON
↓ Press Mode key
⑮ Event Output 1
Press Mode key
PV Event Output 1
⑯ Function
Event Output 1 Loop Abnormal
↓ Press Mode key Time Signal Event Output 1
⑰ Low limit ⑳ Function
↓ Press Mode key ↓ Press Mode key Press
⑱ High limit
ON time Mode key
↓ Press Mode key ↓ Press Mode key
⑲ Sensitivity
OFF
Delay Time
↓ Press Mode key Press Mode key
Event Output 2 function
Press Mode key
PV Event Output 2
Functions
Event Output 2 Loop Abnormal
↓ Press Mode key Time Signal Event Output 2
Low limit
Function
↓ Press Mode key ↓ Press Mode key Press
High limit
ON Time Mode key
↓ Press Mode key ↓ Press Mode key
Sensitivity
OFF
Delay Time
↓ Press Mode key Press Mode key
RUN Signal Input
Communication
Parameter
↓ Press Mode key
Communication
Speed
↓ Press Mode key
Communication
Address
↓ Press Mode key
Response Delay
Time
↓ Press Mode key
Change-over
Communication mode
Press Mode key
Key Lock function
↓ Press Mode key
Return to①.Number of pattern
ON/OFF Control
Control sensitivity(Middle
temp.)
↓ Press Mode key
Middle Temp. area upper
limit
↓ Press Mode key
To
or
PID Control
Proportional band (High
temp.)
↓ Press Mode key
Integral time (High temp.)
↓ Press Mode key
Differential time (High
temp.)
↓ Press Mode key
Proportional cycle
↓ Press Mode key
To
or
.
PID Control + Fuzzy
Fuzzy strength
↓ Press Mode key
ON/OFF Control
Control sensitivity
↓ Press Mode key
Return to
.
PID CONTROL, PID+FUZZY Control
↓ Press Mode key for 3 seconds.
Auto-Tuning(Low temp.)
Temperature setting
↓ Press Mode key
Auto-Tuning(mid. temp.)
Temperature setting
↓ Press Mode key
Auto-Tuning(high temp)
Temperature setting
↓ Press Mode key
Auto-Tuning(All area)
Initial setting display
↓ Press Mode key
Return to
.
＊
h) Control Constant Setting Mode
※※※
i) AUTO-TUNING START MODE
To Next Page
Loading...
Need help?
General