19
Communication
speed
Set Communication speed.
Setting range: 1200,2400,4800,9600
Setting unit: BPS
Communication
Address
Set the own address.
Setting range: 1 to 99 stations
Response delay
Set the interval time to switch to the
transmission mode after receiving.
Setting range: 0 to 250 mSEC
Select Local/Communication mode.
Local mode
Communication mode
Communication
mode switch
Displays when any communication
option adopted.
Select Key lock setting.
Unlock
Lock all parameters
Lock temperature parameter
Lock time parameter
Key lock
function
Lock all parameters except program
parameters (Lock all modes except
for the pattern No. setting and the
parameter per pattern setting)
Communication mode
switch display(
) can
not be locked.
g) Parameter per pattern setting mode
No Character Name Description
Initial
Value
Display condition/Remarks
□
Step □
temperature
setting
Set the temperature value for step □.
Setting range:
～
.
□
Step □ time
setting
Set the time for step □.
Setting range: 0 - 99 hrs. 59 min.
□
Step □ wait
zone
Set a wait zone for step □.
Setting range: 0 to 100 ℃／
□
Step □ wait
time
Set a wait time for step □.
Setting range: 0 to 1 hr. 59 min.
□
Step □ time
signal
ON time
ON Delay
time
Set Time signal ON time.
Setting range: 0 - 99 hrs. 59 min.
When Time signal function 1 is
selected, then set ON Delay time.
Displays when
□
are
,
and
.
□
Step □ time
signal
OFF Delay time
Set Time signal OFF Delay time
Setting range: 0 - 99 hrs. 59 min.
Displays when
□
is
.
Number of
running time
Set the No. of running times
per pattern.
Setting range: 0 - 99 times
(0 for infinite number)
Displays at the last step.
End signal
ON time
Set the End signal ON time.
Setting range: 0 - 9999 sec.
(0 for continuation)
Displays when
□ is
the last step.
To Next Page
Loading...
Need help?
General