Need help?Do you have a question about the Tokyo Hy-Power HL-350VDX and is the answer not in the manual?
300W nominal (330W max.).
10/25/50 W (manually selectable).
13.8 VDC.
42A max. (at 250W output).
Explanation of the main power switch and Power, Warning, and Fan status LEDs.
Details the 13.8VDC power terminal and N-type RF input/output connectors.
Connected to the POWER SWITCH; 13.8VDC turns POWER ON.
Illustrates the system connection of the amplifier.
Instructions for soldering wires to the DIN plug.
Instruction to solder the center conductor to the appropriate pin.
Instruction to solder the braid to the GND pin.
Warnings on power supply requirements and antenna compatibility.
Warnings related to power supply voltage, current capacity, and cable thickness.
Warnings about antenna power rating, placement, and potential RF intrusion.
Installation guidelines and warnings for transceiver input and internal access.
Installation guidelines for placement, ventilation, and clearance.
Warning about transceiver output power exceeding amplifier limits.
Addresses problems with the DC power not turning on.
Guides on resolving no output power or reduced output power.
Causes include mic gain, protection trip, input misconnection, or transceiver issue.
Problems with power supply voltage drop or low transceiver output.
General| Brand | Tokyo Hy-Power |
|---|---|
| Model | HL-350VDX |
| Category | Amplifier |
| Language | English |
To Next Page