Do you have a question about the Tokyo Hy-Power HL-82V and is the answer not in the manual?
The HL-82V is a high power linear amplifier for the 144MHz amateur band, featuring stable operation and excellent linearity, especially for SSB.
Highlights include a power level meter, low noise RX pre-amp, HI/LO output switch, FM/SSB mode switch, and remote control terminal.
Details DC power, frequency range (144-148MHz), modes (FM, SSB, CW), output power (10-85W), input power (1-12W), impedance, and connectors.
Lists semiconductors used, accessories like fuse and manual, dimensions, and weight.
Provides a detailed schematic of the Tokyo Hy-Power Model HL-82V amplifier circuit.
Explains the function of the heat sink, power/RX switches, mode switch, output meter, power level switch, and pilot lamps.
Details the name plate, ANT connector, TX connector, remote control terminal, fuse holder, and DC power leads.
Instructions for connecting power, antenna, transceiver, and checking SWR for basic operation.
Describes automatic switching to receive state and signal bypass when DC power is off.
Details wiring for remote control operation by connecting to specific pins of a plug.
Warns against applying over 15V DC and handling internal components due to precision parts.
| Brand | Tokyo Hy-Power |
|---|---|
| Model | HL-82V |
| Category | Amplifier |
| Language | English |








