45
2. Select Vehicle Type then select your vehicle type from the list shown.
3. Read the Your Safety information then select OK.
4. The My Vehicle screen is shown with the settings for the selected vehicle type.
Select each setting and enter the correct value for your vehicle type. If a setting will not be a
route restriction, for example Maximum Speed, set it to zero.
Tip: For Bus and Truck vehicle types, the dimensions, weight and maximum speed are
pre-set. Adjust the settings to match your vehicle's actual specifications.
Important: Settings that are set at zero are not used to determine restrictions when a route is
planned.
5. If your vehicle is a Truck transporting hazardous materials, select HAZMAT, then select the
type of hazardous material being transported.
6. Return to the map view and plan a route.
A route is planned that avoids route restrictions applicable to your vehicle.
You can find an alternative route or change the route type for all types of vehicles, taking into
account the vehicle's specific settings.
To Next Page
Loading...
