TomTom Go 730 User Manual

84
Making commuting to work easier
The Home to work or Work to home buttons in the Traffic menu lets you
check your route to and from work with one tap of a button. When you use
either of these buttons, your device checks the route for possible delays, and
if it finds any, provides you with the possibility to avoid them.
The first time you use Home to work, you must set your traffic home and work
locations, do the following:
You can now use the Home to work and Work to home buttons of the Show
home-work traffic menu.
For example, to check for delays on your route home, do the following:
1. Tap the TomTomTraffic button in the Main Menu on your device.
2. Tap Show home-work traffic.
3. Tap Work to home.
The route summary screen is shown. In this example, you can see that there
is a single incident on your route that could mean a delay of up to 25 minutes.
3. Select or clear the check box next to each preference you want to change.
4. Tap Done.
Your device lists the countries that have radio stations providing RDS-
TMC traffic information that you can currently receive. Normally you can
leave this set to Any country (strongest signal). For more information
about this country setting, see Choosing the correct country for RDS-
TMC reception on page 86.
5. Tap Done.
Change home-
work
1. Tap the TomTomTraffic button in the Main Menu on your device.
2. Tap Show home-work traffic.
3. Tap Change home-work
4. Set your home location
5. Set your work location.

TomTom Go 730 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Form factor	Fixed
Product color	Black
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Native aspect ratio	16:9
Internal memory	64 MB
Storage capacity	2048 MB
Processor frequency	400 MHz
USB 2.0 ports quantity	1
Battery life (max)	5 h

Weight and Dimensions

Depth	83 mm
Width	118 mm
Height	24 mm
Weight	220 g