TomTom Go 730 User Manual

Itinerary planning14.
42
Itinerary planning
What is an Itinerary?
An Itinerary is a plan for a trip including more locations than your final
destination.
An Itinerary can include the following items:
• Destination - a location on your trip where you want to stop.
• Waypoint - a location on your trip you want to travel through without
stopping.
Here’s an example of an Itinerary:
When would I use an Itinerary?
You could use an Itinerary for trips such as:
• A road trip through a country with lots of stops.
• A two day car trip with an overnight stop.
• A short drive which passes by Points of Interest.
In all these examples you could tap Navigate to... for each place. However, if
you use an Itinerary, you can save time by planning everything in advance.
Creating an Itinerary
1. Tap the screen to bring up the main menu.
2. Tap Itinerary planning.
Destinations are shown using this symbol.
Waypoints are shown using this symbol.

TomTom Go 730 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Form factor	Fixed
Product color	Black
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Native aspect ratio	16:9
Internal memory	64 MB
Storage capacity	2048 MB
Processor frequency	400 MHz
USB 2.0 ports quantity	1
Battery life (max)	5 h

Weight and Dimensions

Depth	83 mm
Width	118 mm
Height	24 mm
Weight	220 g