TomTom Go 730 User Manual

90
Establishing a connection
Before your remote control can communicate with your TomTom GO, you
need to establish a Bluetooth connection between your remote control and
your GO. This Bluetooth process is also known as ‘pairing’.
The first time you switch on your remote control, it tries to establish a
connection with the nearest GO.
To establish a connection, do the following:
1. Switch on your TomTom GO and tap Bluetooth preferences in the
Preferences menu.
2. Tap Enable Bluetooth.
3. Press any button on your remote control to switch it on.
Your remote control communicates with your GO and you are asked if you
want to accept the connection.
4. Tap Yes to accept the connection.
The next time you use your remote control, it looks for your GO. If your GO
is switched off or is not within range, the remote control searches for
another GO.
Lights
Bluetooth
preferences
Note: This button may only be available if all menu options
are shown. To show all menu options, tap Show ALL menu
options in the Preferences Menu.
No light - your remote control is switched off or in power
saving mode.
Flashing blue light - your remote control is searching for your
GO.
Solid blue light - your remote control is connected to your GO.
Red light - battery power is low. Replace the batteries as soon
as possible.

TomTom Go 730 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Form factor	Fixed
Product color	Black
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Native aspect ratio	16:9
Internal memory	64 MB
Storage capacity	2048 MB
Processor frequency	400 MHz
USB 2.0 ports quantity	1
Battery life (max)	5 h

Weight and Dimensions

Depth	83 mm
Width	118 mm
Height	24 mm
Weight	220 g