TomTom Go 730 User Manual

44
Mark as
destination
You can change a waypoint into a destination using this button.
Waypoints are locations you want to pass through on your way to your
chosen destination(s).
Destinations are locations where you want to stop.
This button is only shown if the item you tapped is a waypoint.
Mark ‘visited’
Tap this button to miss out part of your Itinerary. Your GO will ignore this
item and all the items before it in the Itinerary.
It will navigate you to the next item in the Itinerary.
This button is only shown if you are still due to visit this item.
Mark ‘to visit’
Tap this button to repeat part of your Itinerary. Your GO will navigate you to
this item followed by the rest of the items in the Itinerary.
This button is only shown if you have already visited this item.
Move item up
Tap this button to move the item up the Itinerary.
This button is unavailable if the item is at the top of the Itinerary.
Move item
down
Tap this button to move the item down the Itinerary.
This button is unavailable if the item is at the bottom of the Itinerary.
Show on map
Tap this button to see the location of the item on the map.
For more information about the map browser, see Driving View on page 6.
Delete item
Tap this button to delete the item from the Itinerary.

TomTom Go 730 Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Form factor	Fixed
Product color	Black
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Native aspect ratio	16:9
Internal memory	64 MB
Storage capacity	2048 MB
Processor frequency	400 MHz
USB 2.0 ports quantity	1
Battery life (max)	5 h

Weight and Dimensions

Depth	83 mm
Width	118 mm
Height	24 mm
Weight	220 g