TomTom XL User Manual

11
Planning a route with a new starting point
To plan a route in advance of travelling or to use a starting point that isn’t your current
location, do the following:
1. Tap the screen to open the Main Menu.
2. Tap Plan route.
3. Tap Depart from.
You can enter an address in various ways, but we will enter the full address.
4. Tap Address.
Start to type the name of the town where your journey will begin and tap on the name
when it appears in the list.
Tip: When you plan a route for the first time you are asked to select the country or state.
Your choice is saved and used for all future routes. You can change this setting by tapping
on the flag and selecting a new country or state.
5. Enter the street name and the house number, then tap Done.
Tip: Before you start to enter a street name, City centre is shown at the top of the list. This
is useful if you do not have an address and only need general directions.
6. Enter the destination address, then select Now when asked for the departure time and
then tap Done.
The route is planned and a summary of the route is shown.
7. Tap Done.
Your navigation device is ready to guide you to your destination.

TomTom XL Specifications

General

Auto	Yes
Marine (chartplotters, sounders)	No
Form factor	Handheld
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Display number of colors	65536 colors
Internal memory	32 MB
USB 2.0 ports quantity	1

Weight and Dimensions

Depth	83 mm
Width	118 mm
Height	25 mm
Weight	186 g