TOOBOM R63 - How to Record; How to Pause & Resume a Recording

TOOBOM VOICE RECORDER
E: support@toobomworld.com W: http://toobomworld.com
Page 5 of 14
charging or too big electric current will damaged the recorder
3. How to record
1) Push the ON/OFF (power button) to ON
position, switch on the recorder
2) Press the REC button, it will start to
record
3) Press the REC button, it will save
recording
NOTICE:
1) Press and hold REC button
To open / close noise cancellation
function
2) When saved recording, press and hold
PLAY button to switch on / off the device,
keep the power button at ON position
always.
3) Only to push the ON/OFF power
button to OFF position for long time
storage
Switch on the voice recorder, press the REC button, it starts to record
Press REC button again, it will save the recordings
The recordings will be saved, and recordings name will be like:
2018-03-05-172525.wav
So we suggest you set the correct system time of the voice recorder, so each of your
file will be named with a year date information.
The file name like this format:
YYYY-MM-DD + seconds + millisecond + file format (.wav / .mp3)
4. How to pause & resume a recording