Denotes a dangerous situation.
Failure to heed the information can result in death or grave personal injury
(disability)!
Denotes a potentially dangerous situation.
Failure to heed the information can result in property damage as well as
minor or moderate personal injury!
Denotes general information, useful advice to users and work
recommendations, which, however, do not have any influence on the safety
and health of personnel.
1.2. Range of Application
This general safety information is generally valid for all temperature control units from TOOL-TEMP.
1.3. Intended Use
The TOOL-TEMP temperature control unit is built according to the current state of the art and the
generally accepted principles of safety engineering. The temperature control unit is intended solely for
the normal use for heating and/or cooling of injection and die casting moulds, extruders, calendars,
mixers and other consumers in areas in which there is no risk of explosion.
Any use beyond this shall be deemed to constitute improper use. The manufacturer is not responsible
for damage resulting from improper use; the user is solely responsible for such risks. The temperature
control unit may not be used under other operating conditions and/or with other media, in deviation
from our specifications, without the prior consent of TOOL-TEMP.
To Next Page
Loading...
Need help?
General
