ToolKitRC ST8 - Page 5

@ToolkitRC 2019
5
Product overview
The ST8 is a product for testing servos, with up to 28V
voltage output, 8-channel signal output, current
measurement, curve display and other functions.
 4 channels of programmable independent signal, 8
channels of signal output, accuracy of 1 ms.

4 independent current acquisition, respectively,
curve display.
 Multiple measurement modes (speed, count, step,
linear).

output PWM signals with a period of 33 to 1000 Hz.
 A variety of signal trigger sources (internal, buttons,
knobs, external sources).

Measure the response speed of the steering gear
with an accuracy of 1 millisecond.
 The external input signal supports PWM/ PPM/
SBUS with an accuracy of 1 ms.
 The external input signal supports PWM/ PPM/
SBUS with an accuracy of 1 ms.
 Drive the servo with a maximum load of 100W.

Multi-language system, you can upgrade the
language you need.

The device is simulated as a USB flash drive, and
the upgrade file is copied to implement product
firmware upgrade.