Need help?Do you have a question about the ToolKitRC MC8 and is the answer not in the manual?
General| Max Output Current | 8A |
|---|---|
| LCD Resolution | 320x240 |
| USB Output | 5V/2A |
| Cooling | Fan |
| Display | 2.4 inch |
| LCD Type | TFT |
| Battery Types Supported | LiPo, LiHV, LiFe, NiMH, NiCd, Pb |
| Voltage Resolution | 0.001V |
| Current Resolution | 0.001A |
| Protections | Over Voltage, Over Current, Over Temperature |
Defines icons used in the manual: Tip, Important, and Nomenclature.
Provides a link for more information on device operation and maintenance.
Details the components visible on the front of the MC8 device.
Details the components visible on the rear of the MC8 device.
Explains how to display and balance individual battery cells.
Details how to connect the battery lead to display the total voltage of the pack.
Describes how to measure PWM signals on the MC8 device.
Explains how to measure PPM signals after entering Measure mode.
Details how to measure SBUS signals by navigating through modes.
Guides on configuring and outputting PWM signals from the MC8.
Explains how to set the output value for PPM signals on each channel.
Details how to set the output value for SBUS signals on each channel.
To Next Page
