@ToolkitRC 2019
red. 41 ° C is the motherboard temperature, higher than
the safe temperature set by the system will alarm and
flash red.
The right side S1, S2, S3, and S4 are independent
4-channel PWM signals, which are distinguished by
different colors and graphically display the pulse width
value.
The middle grid is a curve display of 4 PWM output
current, which is easily distinguished by the
corresponding color display on the right side.
Below is the output bar, which outputs the
maximum current, speed, and count of each channel in
real time.
The PS, PC and PE buttons are in the lower right
corner. When the button source mode is selected, the
buttons will become selectable.
To Next Page
Loading...
