Top Gin TG300 - 1 Receiving; Inspection Checkpoints

4
1. RECEIVING
CAUTION
●Do not install or operate any inverter which is damaged or has missing parts.
Failure to observe this caution may result in personal injury or equipment damage
This chapter describes how to inspect the inverter after delivery to the user.
1.1 INSPECTION CHECKPOINTS
(1)Receiving Checkpoints
Checkpoints Description
Does the inverter model number correspon
the purchase order？
Check the model number on the nameplate on the
side of the TG-300
Are any parts damaged？
Visually check the exterior and verify that there
was no damage during transport.
Is hardware properly seated and securely
tightened？
Remover inverter front cover.
Check all visible hardware with appropriate tools.
Was an instruction manual received？
TG-300 instruction manual
If any of the above checkpoints are not satisfactory, contact your SHANGCHIN representative.
(2)Checking the Nameplate Data
(a)Nameplate Date
Example of TG-300
TOP GIN MADE IN TAIWAN
TG 300 -
SOU
R
C
E
V
H z
CAPACITY kVA
VOLTS V CURRENTS A
SERIAL NO.
Model
Input power supply
Output capacity
Output power supply
Manuf. No.