25
packing the spinnaker (...)
Take one end of the sheet to each side of the boat and
thread it through the ratchet block on the shroud
(make sure you thread it in the direction of the arrow on
the block).
The ends of the sheets can now be tied together in the
middle of the boat to form a continuous, simply tie an
overhand knot around each sheet with the other and pull
the knots together.
5
6
The downhaul line can now be attached, take the end of the
halyard from the shoot mouth.
The end of the line is fed through the metal ring attached to
the lower patch and then tied to the cross tapes on the top
patch with a bowline knot.
7
To Next Page
Loading...
