6
setting up the hull (...)
When the trampoline is central it can be laced to the rear
beam.
Attach the tensioning line to one end of the rod in the
trampoline with a bowline.
The excess line can the taken across the back and secured
to the line.
the loop to the metal eye on the rear cross beam and take a
couple of turns through the plastic ring on the trampoline
3
5
6
The rope is lead around the buttons on the rear beam, up
and down to the cut outs on the trampoline passing around
the bar, carry on across the whole trampoline you will need
to go back and tighten the line to pull the trampoline tight.
At the last button take an extra loop around the button and
4
To Next Page
Loading...
