8
lacing the trampoline (...)
attach trampoline to front beam
Then repeat along the entire rear beam, so, over the top
of the 2nd wheel and on to 3rd wheel. Then continue lacing
the rear beam.
Tie the front end of trampoline onto slug on front beam.
Then tighten the loop between the second and third and so
on. G. With the tail of the rope, feed line under rear beam,
up through last hole in trampoline, over and around the
glass rod then back to last nylon wheel. Pull tight and tie
onto any of the nylon wheel.
Note; the trampoline lacing will need to be re-Tightened from
time to time to ensure that the Trampoline
remains taut.
Pull tight, so end pulley wheel is tight in the back end of
the trampoline.
stop it slipping.
1
1
2
2
To Next Page
Loading...
