6 Sologic A801
Sologic A801
7 Getting started
7.1 Making a phone call
To make a phone call, pick up the receiver or press the Handsfree button . Enter
the telephone number.
Note: The call duration timer is shown on the display [mm:ss].
7.2 Last number redial
The Sologic A801 saves the last dialled telephone numbers in the redial memory.
1. Pick up the receiver or press the handsfree button .
2. Press , the number will be dialled automatically.
Note: The Redial button can also be used as a Pause button while
entering a telephone number ! The letter ‘P’ appears on the display on the
location where you have added a pause of 3 sec.
7.3 Mute
It is possible to mute the microphone during a conversation by pressing and holding
the mute button . You can now talk freely without the caller hearing you.
Release the Mute button if you want to resume your conversation.
7.4 Ringer volume
When you receive a phone call, the unit will ring. The ring volume can be adjusted
by means of the Ring Volume switch at the back of the phone (Hi- , Lo- ). (13)
7.5 Flash Key
Press the Flash button (R) to use certain services as ‘Call Waiting’ (if this service is
provided by your telephone company); or to transfer phone calls when you are
using a telephone exchange (PABX).
The flashtime can be selected by the switch (12) on the back of the phone (100/300
ms).
Before changing the flashtime switch, the line cord must be disconnected.
To Next Page
Loading...
