Topcom TS-5611 - Receiving a Call

Sologic TS-5611 9
Sologic TS-5611
ENGLISH
• Press the phonebook key . The first number of the phonebook appears on the
display.
• Press the up or down key / repeatedly to select the telephone number you
want to call.
• Press the off hook key .
• The number shown on the display, is dialed automatically.
• After finishing your call, press the on hook key or put the handset back on the
base unit to hang up.
4.3.6 Calling a programmed number from the photo keys
See “7.1 Storing a number under a photo key” how to store a number under each photo key.
To call a number from the photo keys:
• Press the off hook key .
• Press one of the photo keys you want to dial
• The number is shown on the base display, is dialed automatically.
• After finishing your call, press the on hook key or put the handset back on the
base unit to hang up.
4.4 Receiving a Call
During internal or external incoming call, the handset will start to ring. You can change the
ring volume by pressing the up or down keys / .
• All subscribed handsets will ring when you receive a call.
• The telephone number of the caller appears on the display if you have Caller ID service
(CLIP). Consult your telephone company. The name of the caller also appears on the
display if:
– the number is programmed into the phonebook with name.
– the network sends the name together with the telephone number .
• Press the off hook key to accept the external call.
• OR Lift the handset off its base unit (if the auto answer option is active,
see §“4.15 TAuto
answer”
).
• During the conversation the symbol appear on the display and the call timer starts
to run.
• After finishing your call, press the on hook key to hang up or put the handset
back on the base unit.
4.5 Redial list options
When scrolling through the redial list (see §“4.3.4 Redial one of the last 10 numbers dialed”)
you have the following options:
When the desired number is shown on the display press ‘More’ and select with the up
and down keys
/ the following options:
•‘Add to PB’: to store the number into the phonebook memory. Press ‘Select’ to confirm.
Enter a name (See §“5.1 Adding a number and a name to the phonebook”) and press
‘Next’ . Edit the number and press ‘Next’. Select the desired ring melody and press
‘Save’ .
•‘Delete Call’: to delete an entry in the redial list. Press ‘Del’ to confirm.
•‘Delete All’: to delete all entries in the redial list. Press ‘Del’ to confirm.
7
15
7
12
6
12
18
6
15
7
12
6
13
15
7
13
13