X25 APOLLO II QUICK START GUIDE
ISSUE A RDS PT NO. S/DC500-10- 1
Startup and Overview
1. Press and Hold the Green button on the rear of the console for a few seconds.
2. Scroll to the base of the warning screen and if you agree, select ‘YES’.
NOTE: Selecting ‘Yes’ confirms your understanding and accepts your responsibility for liabilities
described in the Warning Screen.
3. The console then displays the X25 Home screen, indicating the position and direction of the
vehicle and its implement as a moving map display.
X25 Home screen
4 If the Apollo application was running when the console was last shut down, then
on startup the console will automatically default to the Universal Terminal (UT)
application window displaying the Apollo operating screen. Otherwise, swipe up
or down the navigation bar if necessary and select the ISOBUS UT icon .
5. The Apollo software is uploaded from the implement ECU, after which a mini-view
of the application is displayed. Touch or swipe the mini-view from left to right
to maximise the application window.
Apollo Home screen
System info
Guidance
GPS info
Diagnostics
Job info
Auto section control
UT (Apollo app)
Master Switch
Activates coverage on the
guidance screen. (NOTE: It does
not switch the spreader on /off)
Moving map
display
Dashboard: Provides selected information to
monitor system status / performance. Swipe
To Next Page
Need help?
General
