Need help?Do you have a question about the Topcon MC-X3 and is the answer not in the manual?
General| Category | Control Systems |
|---|---|
| Manufacturer | Topcon |
| GNSS | Integrated GNSS receiver |
| Operating Temperature | -20°C to +60°C (-4°F to +140°F) |
| Display | Touchscreen display |
| Connectivity | Bluetooth, Wi-Fi |
| Communication | Bluetooth, Wi-Fi, USB |
Provides essential advice and warnings for the installation process, including welding.
Provides step-by-step instructions for mounting the TS-i4 sensor on the dozer blade.
Details the process for installing the TS-i4 sensor on the dozer's C-frame.
Outlines the procedure for mounting the TS-i4 sensor on the dozer body.
Explains the mounting procedure for the MC-X3 controller behind the operator's seat.
Covers the installation of Main and Auxiliary GNSS receivers on the dozer cab roof.
Details the final cable connections to the MC-X3 controller.
Refers to an external manual for post-installation measurements, configuration, and calibration.
Final steps to secure cover shields onto the installed TS-i4 IMU sensors.
Provides crucial safety precautions for operating and installing Topcon components on heavy machinery.
Advises on safe installation distances and conditions to comply with RF exposure regulations.
To Next Page
