General Warnings
3-1
P/N: 1049060-01
Regulatory Information and Safety Warnings
General Warnings
1. Read and become familiar with the machine manufacturer’s operator’s manual, including safety
information, before installing or using Topcon components.
2. Use extreme caution on the job site. Working around heavy construction equipment can be
dangerous.
3. DO NOT attach Topcon brackets, cables, or hose connections while the machine is running.
4. DO NOT allow any Topcon components to limit the visibility of the operator.
5. Use cable ties to keep hoses and cables secured, and away from possible wear or pinch points.
6. Use eye protection when welding, cutting, or grinding on the machine.
7. Protect yourself at all times, and wear protective clothing when working on or near hydraulic lines.
Hydraulic lines can be under extreme pressure, even when the machine is turned off.
Relieve all pressure in the hydraulic lines before disconnecting or
removing any lines, fittings, or related components. If injury occurs, seek
medical assistance immediately.
When welding, use appropriate precautions and practices. After welding,
all affected areas should be painted with a rust inhibitor.
Disconnect all Topcon system electrical cables prior to welding on the
machine.
DO NOT weld near hydraulic lines or on any equipment when in operation.
All mounting bracket welds must be secure and strong to prevent the
sensor equipment from vibrating excessively, or from detaching at the
weld during operation.
This product should never be used:
● Without the operator thoroughly understanding the Operator’s Manual
and Quick Reference Guide.
● After disabling safety systems or altering the product.
● With unauthorized accessories.
● Without proper safeguards at the job site.
● Contrary to applicable laws, rules, and regulations.
TPS products should never be used in dangerous environments. Use in
rain or snow for a limited period is permitted.
To Next Page
Loading...
Need help?
General
