33
● Selecting mode 2
Sample setting: [0 SET] key pressing : Once, Tilt correction
: OFF
1
Turn the power ON while pressing the [V/%] key.
The instrument will be in the selecting mode 2, and the digit No.1
( 0set key pressing) will blink
.
2
Press the [ ] key to set 1 for the digit.
● Every time pressing the [ ] key, the blinking digit value 0/1 switches.
3
Let the digit No.4 (Tilt correction) to be set blink by pressing the
[
] key.
● Pressing the [ ] key, blinking digit moves to the right.
4
Press the [ ]key to set 0 for the digit.
5
Press the [0 SET] key to set the setting.
6
Turn the power off.
0 0 1 0 0 0 0
Blinking
0 0 1 0 0 0 1
0 0 1 0 0 0 1
Blinking
0 0 0 0 0 0 1
S E T
0 0 0 0 0 0 1
To Next Page
Loading...
Need help?
General
