Chapter 5 Warnings and Certifications 35
RF exposure requirements, do not co-locate this device with other
transmitters.
This device operates in compliance with the radio frequency
exposure limits for an uncontrolled environment. Users must
follow instructions provided in the user documentation to satisfy
compliance with radio frequency exposure requirements.
There cannot be any alteration to the authorized antenna system.
CE Marking (European Union)
Products bearing the CE marking comply with EU Directive
2014/53/EU.
CE compliance of this device is valid only if powered with/by a
CE-marked wall charger provided by the manufacturer. Cables
connecting to the USB host port must use a ferrite core/bead on
the cable. The ferrite core must be placed on the cable near the end
that connects to the FC-600.
To Next Page
Loading...
