28
SPECIFICATIONS
SPECIFICATIONS
MICROSCOPE
Type Stereoscopic microscope
Magnification selection Two steps by objective lens rotation
Eyepieces 10× and 16×
Magnification ratio
(Field of view)
Objectives × Eyepieces = Magnification/Field of view
INTERPUPILLARY
Distance adjustment 10× magnification eyepieces - 55mm to 82mm
16× magnification eyepieces - 51mm to 78mm
Diopter adjustment 10× magnification eyepieces - ±8 diopters
16× magnification eyepieces - ±10 diopters
ILLUMINATION
Slit projection magnification 2/3×
Slit width Continuous from 9mm to 0mm (at 9mm, slit becomes a circle)
Slit length
Continuous from 8mm to 1mm
OR
Aperture settings at 9, 8, 5, 3, 2, 1, and 0.2mm dia.
Slit angle 0° to 180° with horizontal scanning capability
Slit inclination 5°, 10°, 15°, and 20° steps
Filters Blue, red-free, 13% ND, and heat-absorbing
Lamp 6V, 20W Halogen lamp
BASE
Longitudinal movement 90mm
Lateral movement 100mm
Fine base movement
(with joystick)
15mm
Vertical movement 30mm
CHINREST
Vertical movement 80mm
Fixation target
Luminous target
6V, 0.2A bulb
HRUBY LENS
Hruby lens -58.7 diopters (Option)
POWER
Source voltage 100-120/220-240V AC, 50/60Hz
Power input 160VA
1× 10× 10× 18mm diameter
1.6× 10× 16× 14.5mm diameter
1× 16× 16× 11.25mm diameter
1.6× 16× 25.6× 9mm diameter
To Next Page
Loading...