Topdon BT100 - Battery Specification

22 23
EN
Q: Will BT100 work on motorcycle charging systems?
A: It works on a 12V system and the CCA range is between 100-2000.
Q: Will this tester work with marine batteries?
A: Yes, it can work with marine batteries.
Q: Will this accurately load test ATV batteries?
A: Yes, it can accurately load test ATV batteries.
Q: What does SOH, SOC, and RES mean?
A: The SOH refers to the “State of health”. The SOC is the “State of charge”
and the RES is the “resistance value” of the battery.
Battery Specication Table
(For reference only. The actual value is subject to corresponding
manufacturer.)
Battery System Standard Description
The battery tester analyzer will test each battery according to the selected
system and rating.
BCI
Battery Council International standard
Cranking Amps standard, effective starting current value at 0°C
Marine Cranking Amps standard, effective starting current
value at 0°C
Japan Industrial Standard, displayed on the battery as
combination of the numbers and letters, e.g. 55D23, 80D26
German Auto Industry Committee Standard
Internal Electro technical Commission Standard
European Automobile Industry Association Standard
Society of Automotive Engineers Standard
China National Standard
CA
MCA
JIS
DIN
IEC
EN
SAE
GB
Cold Cranking Amps, specied by SAE & BCI, most frequently used value for starting
battery at 0°F (-18°C)
CCA