Topfield TBF - 7200 - Displaying the Time in Standby Mode

22 Preference Settings
Position option as you desire. Its available range is − 10 to + 3
lines. The higher you set the option, the lower the information
box will be positioned.
3.5.1 Displaying the time in standby mode
You can display the current time on the front display in standby
mode. To display the time, set the Standby Mode option to
Active standby. Otherwise, set it to Passive standby. When you
set the Standby Mode option to Active standby, the receiver can
also bypass the signal from the antenna.