10
DVI-D connection: The connection to the computer can be made via the
digital single link. The picture quality, noise immunity and radiated
interference of the complete system depend on the cable quality and length.
DP connection: The connection to the computer can also be made via the
Display Port connection. The picture quality, noise immunity and radiated
interference of the complete system depend on the cable quality and length.
4.2 Power up the display
Use the power switch to power up the flat panel display. The operation LED
lights up (color: green)
4.3 Screen saver
A screen saver function should be used in order to reduce "image sticking"
which can occur in TFT displays.
It is high risk to display a static graphic over half an hour.
Image sticking is the effect where a faint image of the previous screen
contents can still be seen after the display contents have changed. By using a
screen saver with permanently changing screen contents, unnecessary
effects of the same image are avoided.
If the keyboard is locked, contact the servicing department in order to unlock it.
The guarantee is cancelled if you unlock it yourself!
5. Adjustments
5.1 Picture adjustment
This section describes the settings for operation of the flat panel display with a
video source.
Fine adjustment of the flat panel display
To Next Page
Loading...
Need help?
General