7
Care of unit / cleaning agents
−The front panel is extremely sensitive to mechanical damage. Avoid all
scratches, knocks etc.!
−Remove water drops immediately which will discolor the surface. Clean the
front panel when dirty, using a micro fiber cloth and, if necessary, a glass
cleaning agent. Only clean housing parts using a cleaning agent for plastics.
Note:
Do not use cleaning agents containing solvent, e.g. petroleum
Explanation of the symbols
Direct current (DC)
China RoHS symbol
EC W EC WEEE symbol
European conformity
TUV approval mark
Attention: Consult the accompanying documents
3. Installation
Provide adequate ventilation
Ventilation slots are located on the rear of the housing.
Ambient temperature
The permissible ambient temperature range must not be violated.
Minimize reflections
To Next Page
Loading...
Need help?
General