6
with servicing. The following applies to installations in the USA and Canada:
Molded power supply plugs must comply with the requirements for "Hospital
Grade Attachments" UL 498.
Caution
Failure to observe the warnings may result in substantial damage to
property.
Provide sufficient heat dissipation
Slots are provided at the rear of the housing. The display must be placed or
secured on a hard, level surface at least 10cm from the wall and 15cm away
from other devices. Several displays can be butt-mounted horizontally and
vertically.
The following must be observed when mounting (VESA connection):
Mounting screws
Number
4
Thread
M6
Immersion depth Max. 15 mm
Torque Max. 12Nm
Mounting screws
The permissible ambient temperature range (10 °C ... 35 °C) must not be
violated. Do not subject device to unnecessary shocks. Take care when
transporting! Use the original packaging! The panel in particular should be
protected against shocks.
When touching the panel surface, the mechanical contact or an electrical
discharge may cause a brief disturbance in the picture quality.
To Next Page
Loading...
Need help?
General