Need help?Do you have a question about the Torch-Bigtide HL3116ST and is the answer not in the manual?
General| Brand | Torch-Bigtide |
|---|---|
| Model | HL3116ST |
| Category | Monitor |
| Language | English |
Complies with ANSI/AAMI ES60601-1 and CAN/CSA C22.2 NO. 60601-1 for medical electrical systems.
Essential safety warnings including danger to life, not opening the unit, and avoiding objects in the housing.
Highlights risks of incorrect installation and the need for trained personnel, observing EN 60601-1-1 specifications.
Specifies measures to ensure discharge currents remain below required limits, including using safety transformers and securing covers.
Stresses the importance of following manual instructions and safety precautions during start-up, and warns against user-modified settings.
Details on connecting power and signal cables (DVI-D, Display Port), including warnings for handling the display.
Describes settings for operating the flat panel display with a video source, focusing on fine adjustment via the analog port.
Guidance on achieving optimal picture quality by using the correct graphics resolution (3840 x 2160 pixels) and proper picture positioning.
Details panel module, size, active display area, resolution, pixel pitch, luminance, viewing angle, color support, contrast, response time, and backlight.
Lists safety standards (IEC/EN/UL60601-1), approvals (c TUV us, FCC, CB), protection class, and conformity (CE).
Details compliance with electromagnetic compatibility standards like IEC/EN60601-1-2, FCC Part15, and CISPR11.
Details FCC compliance, conditions for operation, and measures to correct potential interference.
To Next Page