Need help?Do you have a question about the TorcUP TU Series and is the answer not in the manual?
Precautions for proper operation, maintenance, and usage of the hydraulic wrench.
Visual warnings regarding hose condition, PPE, and safe body positioning.
Procedures for connecting hydraulic hoses to the torque wrench and pump.
Steps for setting square drive rotation and desired torque output.
Proper positioning of the reaction arm against a positive stop.
How the square drive position determines tightening or loosening action.
Instructions for applying lubricant to tool components for wear surfaces.
Mandatory lubrication intervals for specific contact areas every 80 hours.
Detailed dimensions and specs for TU-2, TU-3, TU-5, TU-7 models.
Detailed dimensions and specs for TU-11, TU-20, TU-27, TU-60 models.
Step-by-step guide for disassembling cylinder assemblies for TU-5, TU-20, TU-27, TU-60.
Instructions for assembling the reaction arm for models other than TU-20.
Specific instructions for assembling the reaction arm for the TU-20 model.
General| Type | Pneumatic Torque Wrench |
|---|---|
| Air Inlet | 1/4" NPT |
| Weight | Varies by model |
| Length | Varies by model |
| Power Source | Pneumatic |
| Max RPM | Varies by model |
| Air Consumption | Varies by model |
| Sound Level | Varies by model |
To Next Page
