To Next PageTo Next PageWhy my Torin Jacks will not hold load?
If your Torin Jacks won't hold a load, there are a few potential reasons. Ensure the release valve is completely closed by turning the handle clockwise. Also, check the oil level and add oil if it's low. Finally, the power unit may be malfunctioning and require replacement.
What to do if Torin Jacks will not lower?
If your Torin Jacks won't lower, it could be due to air in the hydraulics, so try purging air from the system. Another reason might be an overfilled oil reservoir, so drain excessive oil and lubricate moving parts. It's also possible that the jack is binding or there's a foreign obstruction.
What to do if my Torin BIG RED T825013S won't lift the load?
If your Torin Jacks won't lift the load, it could be due to several reasons. First, check if you've exceeded the weight capacity. Ensure the release valve is completely closed by turning the handle clockwise. Another possibility is air in the hydraulics, which requires purging the air from the system. Also, check for a low oil level and add oil as needed. Finally, the power unit might be malfunctioning, in which case it should be replaced.
What causes poor lifting in Torin BIG RED T825013S?
General| Model | T825013S |
|---|---|
| Type | Floor Jack |
| Material | Steel |
| Color | Red |
| Warranty | 1 Year Limited Warranty |
Defines user's obligation to read, understand, and follow manual instructions for safe use.
Broad safety directives and warnings to prevent serious injury.
Important points for safe operation and regular inspection of the jack.
Emphasizes the necessity of reading and understanding the manual before operation or repair.
Clarifies the jack's sole purpose for lifting and the requirement for jack stands.
Details critical safety markings and numbered warnings for user awareness.
Detailed instructions for safely lifting a vehicle, including wheel chocks and saddle placement.
Step-by-step guide for safely lowering the vehicle and removing the jack.
